How to remove tub spout without set screw?

What is a Bathtub Spouts?

A bathtub spout is a device attached to the side of a bathtub and is used to control water flow. The most common type of bathtub spout is the diverter type, which has a lever or knob to redirect the water from the tub faucet to the shower head.

how to remove tub spout without set screw

Types of Bathtub Spouts 

Several types of bathtub spouts are available on the market, and each has its own advantages and disadvantages. The most common type is the traditional spout, which is attached to the wall and has a water supply line running. 

This traditional spout is generally very reliable and easy to install, but it can be challenging to clean. Another popular type of bathtub spout is the handheld shower head, which can be attached to the wall or the ceiling. 

This handheld shower head spout is convenient for bathing children or pets, but reaching all areas of the tub can be challenging. 

Finally, bathtub spouts come with a diverter valve, which allows you to switch between the shower head and the faucet. These spouts are more expensive, but they offer more flexibility in terms of use.

Why is Tub Spout Difficult to Remove?

There are a few reasons why a tub spout may be challenging to remove. The first reason is that the spout may be old and corroded. This can make it challenging to loosen the spout from the pipe. 

The second reason is that the spout may be tightly sealed with a plumber’s putty or another sealant. This can make it difficult to pry the spout loose. 

Finally, the pipes behind the tub spout may be in the way, making it difficult to remove the spout without damaging the pipes.

How To Remove a Tub Spout Without Set Screw?

You will need to use a pair of pliers to remove a tub spout without a set screw. 

  1. First, locate the set screw on the underside of the tub spout. 
  2. Use the pliers to loosen and remove the set screw. 
  3. Last, use the pliers to twist and pull the tub spout off the pipe.

Tips For Removing A Bathtub Spout Without A Screw

If you need to remove a bathtub spout without a screw, you can use a few different methods. 

One method is to use a putty knife or another thin, flat object to pry the spout off. Another approach is to use a hammer and screwdriver to gently tap the spout until it comes loose. You can also try pliers to grip the spout and twist it until it comes off.

How to Replace a Bathtub Spout?

If your bathtub spout is leaking or other, first, you need to remove a bathtub spout without a screw. And this is a step to replace tub spouts: 

  1. Turn off the water in your bathroom
  2. Place a bucket or container under the tub spout to catch any water that may drip when you remove the old spout.
  3. Use a wrench to loosen and remove the retaining nut that secures the spout to the wall. You may need to use a pair of pliers to grip the nut while you turn it with the wrench.
  4. Pull the old spout off of the pipe and discard it.
  5. Clean any old plumber’s putty off the pipe before installing the new spout.
  6. Put a bead of plumber’s putty around the base of the new spout, then press it onto the pipe.
  7. Hand-tighten the retaining nut until it is snug against the wall, then use the wrench to give it one more quarter-turn for good measure. Be careful not to overtighten, as this could damage both the spout and the wall.

Question and Answer

Are tub spouts universal?

There is no definitive answer to this question as there are various types and styles of tub spouts on the market.  However, many tub spouts are designed to be universal, meaning they can fit various types of tubs. 

So, if you’re looking for a tub spout that will fit your specific tub, it’s best to check with the manufacturer or retailer to see if the model you’re interested in is compatible.

How to remove the tub spout with a set screw?

To remove a tub spout with a set screw, unscrew the set screw with a screwdriver. Once the set screw is removed, the tub spout should pull off easily. If the faucet is stuck, try tapping it lightly with a hammer.

Do you need to shut off the water to change the tub spout?

No, you don’t need to shut off the water to change the tub spout. You can use a wrench to loosen the old one and then hand-tighten the new one.

What Trick to Remove That Stuck Tub Spout?

If you have a stuck tub spout, there is a simple trick that you can use to remove it. First, unscrew the spout from the wall. Next, take a hammer and tap on the end of the spout. This will loosen the spout and allow you to pull it off. The following is a video about Tricks for Removing Stuck Tub.

Related Article

Photo of author
Roberts

About Us

About us guide home blog

We’re a team of home improvement enthusiasts who want to make your life easier. Whether you’re a first-time homeowner or a seasoned pro, we’ve got you covered. We’ve gathered the best tips and advice from experts and everyday homeowners and put it all in one place. So whether you’re looking for information on roofing, painting, or anything in between, you can find it here.